Ask Experts Questions for FREE Help !
Ask
    bighappyman's Avatar
    bighappyman Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2011, 10:46 AM
    Husqvarna yth2448 riding mower electrical problems BS intek v twin 24 hp
    Went to start it mid-chore and it didn't do anything. Turned key-- got nothing. Nada. Battery is good. Hour-meter isn't lighting. Headlamps don't come on. Checked (and replaced) seat sensor, solenoid, ignition switch, and PTO switch. Still nothing. Engine turns over fine when I bypass ignition switch (screwdriver from pos to negative at solenoid). Fuse is fine. Clutch switch appears functional (didn't replace it)-- not sure it's called a clutch switch. It's the push button switch under the left-side "brake" pedal. Machine is a 2005 with a BS Intek V twin 24hp engine. Has maybe 200 hrs on it. Recently replaced drive belt. Hasn't given me a lick of trouble up till now. Am truly puzzled. Thoughts?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Mar 6, 2011, 11:16 AM

    Hi,
    The switch (key) has multiple circuits/paths built into it and the path fot that is not working.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husqvarna Riding Mower [ 3 Answers ]

I have a 2 year old Husqvarna riding mower with a Briggs and Stratton engine. It ran fine until a couple of weeks ago when the engine started running rough and black smoke came out of the front of the mower. Thinking that maybe diesel fuel was put in it, I drained the tank and put in new gas and...

Murray riding mower, electrical problems, changed all switches and solenoid [ 9 Answers ]

I have a murray riding lawn mower: Model: 282H07; Type: 0196E1. I cannot get this thig to start with the key. I have to jump the solenoid to start it. I have changed all the switches and the ignition. When I do jump the solenoid to start it, it runs around 5 seconds and dies. Almost like...

Husqvarna riding mower no power [ 1 Answers ]

Neighbor has a 5 yr old Husqvarna riding mower runs great lots of power when traveling as soon as blades engaged no power any ideas where to start?? I think its and 18 hp automatic

Husqvarna Riding mower - carb problems [ 4 Answers ]

Hello, I have ~2005 Husqvarna riding mower with a Briggs & Stratton Vanguard engine (model #385777), that has started running poorly. The first time this happened I was pretty sure that I had gotten some bad gas... it started missing a little, then progressed to backfiring, and finally noticed...

Problems with husqvarna yth2448 [ 6 Answers ]

My mower stops cutting on its own, and will not start cutting again until started up again only to stop cutting again a few minutes later.:confused: :mad: :

View more questions Search