 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My Hampton Bay remote no longer operates the fan but the light still works.
My Hampton Bay remote no longer operates the fan and since that is the only way to operate the fan, we cannot use the fan at all. The remote has relatively new batteries and the light works fine. What can be done to fix the problem? The serial number for this fan is: 0000 893 and we purchased it at Lowe's in Jacksonville, Florida. Thanks so much for your help... it will be getting hot down here soon so we are going to need to use it before long.
|
||||
|
||||
|
The first step is to open the canopy and verify that there is power coming out of the receivers balck and white wires. Unscrew the wire nuts and make sure you are on the output side of the receiver. Attach your test leads to Blk and what and then operate your remote. Come back when you can and tell us what your measured |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
I figured this may help somebody here. I have a Hampton Bay remote controlled ceiling fan... the kind without pull chains... and the remote will only operate the fan portion but not the light. The light is always on. Not a big deal, as the light switch on the wall could be used to turn the light...
All of a sudden last week the remote stopped working on my Hampton Bay fan.. (model: #55295, 54 inch Brushed Steel w/Remote) Things I have done: 1) Replaced the batteries in the remote 2) Ensured the dip switches match on the remote and the fan 3) Ensured there is power going to the fan ...
Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...
I installed this fan OK... it was fine for 2.5 years now the remote only works the fan speed. It does not work the lights. I removed the fan and checked connections which are good.Luckily the fans lights are in the on position and POWER is through a wall switch,that controls the lights. But I wish...
View more questions Search
|
