 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
D-Link DPR-1260 wireless mode not working with 2Wire Router
D-link DPR-1260 print server is not working in wireless mode with 2Wire router. I works fine when connected with cable to the router. It also recognizes the 2Wire router for selection. It is set to DHCP by default. But, it will not take static IP, nor the authentication key of the router. In each of these cases it does not reboot. Also, when it is linked through Wireless settings to the router, suddenly the router gets very busy and that slows down access considerably.
|
||||
Check out some similar questions!
I have a lyksys 54g my laptop works fine but tried hooking up a PC and sometimes it works great oyher times it says can not renew ip where do I start to fix it I'm lost
I have D-LINK DI-624+. At first I couldn't get into page http://192.168.0.1 but I connected my PC to LAN side of the D-LINK according to advice from this site. And everything was fine until I saved my changes and restarted. Immediately after that my computer says "network cable is unplugged" and...
Hi, I recently upgraded my internet speed to BigPond ADSL 600MB 20000/512 and since then I have been unable to hook up through my wireless router. Is there something I need to change on the computer, modem or router?
I just got a new laptop with a wireless card in it, and I got a wireless router as well, I tried running the setup guide but it didn't work from the CD, so I connected the router to my modem with the cable provided, my laptop will connect to the router, but it won't access the internet... My...
I have DI-524 Wireless Router. How do I set up to require users to require password to connect (go from unsecured to secured)? I suspect my neighbors using my router and it is impacting performance of my connections. And for the life of me, I can't figure out the manuals which came with the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
