Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can you use the r22 gauges to read the 410 preasure
[ 1 Answers ]
Can you use the R22,gauges to read preasur of the 41a
Can are 410 Puron be put into a R22 system
[ 4 Answers ]
I was told by two different contractors that if you switch from a R22 system to the R410 A You have to replace the lines and the coil above the furnace. Another contractor says that's not true, you can use the same lines and coil. Who is correct? The system we're talking about here is for a...
R22 Compressor vs. Entire new 410 unit
[ 0 Answers ]
We need a new compressor but the contractor from my home warranty will only replace with 410. Which means that I have to replace my inside unit at the low, low price of $1750. Is this the right move or am I being done in?
How much more expenseve is a 410 system vs an r22 system
[ 2 Answers ]
How much more expensive is a 410-a system vs an r-22 system
Need to replace old central air unit. R-410 vs R22?
[ 5 Answers ]
My 24 year old Carrier central air conditioner finally needs to be replaced. Should I replace it with the newer 410 system or purchase another R22 unit? I was considering going with a Bryant system. Is Bryant the same as Carrier? Any help is appreciated. Thanks View more questions Search
|