Check out some similar questions!
Replacing a Lennox Thermostat with a Lux Thermostat
[ 3 Answers ]
I have an older analog Lennox thermostat and am replacing with a Lux ATX500 thermostat. The Lennox thermostat connections do not match those on the Lux. The Lennox is a 6 wire connection with terminals: F, V, R, X, Y, M The Lux has terminals: G, Y, W, RH, RC The Lux instructions are very...
Wiring a lux 1500e thermostat for heat pump
[ 0 Answers ]
I am trying to put in a Lux TX1500E thermostat, replacing a trane weathertron. I have a humidistat attached that will control the thermostat. The trane wiring is: g-green, o-orange, x2 looped to u, y-black, t-brown (humidistatwire), r-red (humidistat wire), w-white, u-looped to x2, f--empty,...
Lux 1500 thermostat clicks on but isn't blowing out heat
[ 0 Answers ]
I have a lux 1500 thermostat. When I turn the heat on, I hear it starting up but there isn't any heat coming through the vents. At 1st Filter was flashing on the thermostat so I replaced it. I also replaced the batteries. I t worked well for about 5 minutes then nothing. I turned it off then back...
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B - View more questions Search
Add your answer here.
|