Ask Experts Questions for FREE Help !
Ask
    nopaybob's Avatar
    nopaybob Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2011, 11:56 PM
    My Intertherm heatrite Gas furnace will only stay working if the filters are removed
    LoL I Have the same problem , My furnace will only stay working if the filters are removed. We have replaced the thermocouple, gas valve and flu cap on an intertherm heatrite mgh-065-abwn-06. We have looked at the acoil and it looked clean on both sides on the top. There is a fresh air intake up next to the flu that we can feel some cool air, so I figure that's not plugged.

    If I light the pilot with the filters installed I can get the furnace to start and heat for about three to five minutes before the flame shuts of and the pilot is out the blower will run for another minute or so then that's it have to light the pilot again.
    Any help to solve my problem would be great ,I really don't want to run without filters thanks

    After a night of running without filters the pilot did go out again...

Check out some similar questions!

Intertherm gas heater pilot lite won't stay lit. [ 3 Answers ]

I have followed the directions, yet the pilot lite won't stay on.

I have an intertherm ultraflex electric furnace the air coming out won't stay warm [ 1 Answers ]

The air coming out is warm at start then cools down I flip the switch on the furnice from auto to on then back to auto it gets warm then goes back to moderet warm. And it runs all the time because it trying to get to the temp set on thermastat if u turn temp down it shuts off.

Intertherm gas furnace issues [ 0 Answers ]

My intertherm gas furnace model #g4ra096c-16 the fan does not run regardless if the thermostat switch is in the auto or manual position, on top of that the burners will only stay on for about three seconds after startup where do I start looking for the cause of these problems

How Do I tell What Size My Intertherm gas furnace is? [ 5 Answers ]

The Model #mgh-065-abwn-06. If anyone can be of any assistance please help! Its HOT in here! Thank you. Any Questions feel free to ask.

Intertherm Gas Furnace Age [ 1 Answers ]

Hi there, I'm trying to figure out the date of an Intertherm gas furnace in a mobile home. Home is 1981 vintage. It's a 64,000 BTU furnace , Model MBH 080, Date/Code 18881NGL01 Any takers? Its probably the original unit, but I'd just like to be certain. Carrier Blue Book is of no help to...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.