Ask Experts Questions for FREE Help !
Ask
    sharpredvette's Avatar
    sharpredvette Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2011, 06:02 PM
    Ariens 1640 zero turn creeps rearwards at idle and steering leavers misaligned
    I have a Ariens 1640 that will creep backwards at idle and leavers are misaligned, about 4" difference, left leaver is ahead of the right.Is there an adjustment I can make? Thanks for your time and troubles,Ron
    lilpoppa's Avatar
    lilpoppa Posts: 118, Reputation: 13
    Junior Member
    		  
    #2

    Mar 6, 2011, 09:22 PM
    There should be an ajustment bolt a the base of both levers to adjust and get the levers aligned. But the creeping reward is likely caused by worn seals in the control valves.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ariens zoom 1640 zero turn mower, steering [ 0 Answers ]

Ariens zoom 1640 zero turn mower. Mower will creep rearwards at idle and the steering leavers are not align when mowing straight, the left is about 4" forward of the right leaver. Can this be corrected by an adustment, if so please tell me how.Thanks for your time and troubles. Ron Thanks for the...

My 2002 Avalon key turn enough to unlock the steering, but cannot turn the car on [ 1 Answers ]

My 2002 Avalon key turn enough to unlock the steering wheel but cannot turn the car on. I tried everything that I read on this forum, but it did not work. So my conclusion is my cylinder is bad. How do you change the lock cylinder with the key just turn enough to unlock the steering wheel, if you...

Ariens ST724 idle issues [ 2 Answers ]

I have an Ariens ST724 snowblower, (it's over 25 years old). When it's running at an idle or when its in gear the enginie idle just goes real high for noi reason. I've tried to adjust the throttle control but it only stalls when I turn it down. Any idea as to what may need to be done to correct...

Steering wheel just spins wheels don't turn [ 4 Answers ]

My 1998 Dodge Ram 1500 the steering wheel spins freely(zero friction)and the wheels do not turn.This happened the day after I towed a trailer not while I was driving(thankfully). The steering column and the linkage in the engine compartment are all OK. I do believe it is the knuckle at the tilt...

Steering wheel won't turn [ 1 Answers ]

I have a 2003 Ford Focus. My ignition lock wouldn't turn, thus not allowing my steering wheel to turn. I drilled out the ignition lock cylinder and the steering wheel was able to be turned. Now, the ignition cylinder is still out of the vehicle and the steering wheel is still locked. I'm not...

View more questions Search