 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
New gas valve installed smell gas
Initially we ran out of propane - refilled tank and had the furnace came back up fine - worked for about a few hours than no burner... no warm air fan worked fine - service tech came out - replaced the gas valve in our mobile home Intertherm furnace - we ran overnight but smelled gas the next morning.
|
||||
Check out some similar questions!
Hi - We had a problem with drainage in our kitchen sink after a remodel. It was a year ago I came to this site and asked for help. It was recommended we install a studor vent - which seemed to correct the problem and has worked great. However, we are now getting a terrible sewer smell from the...
The gas valve comes on and I hear ignition. The flame then immediately goes out and the process repeats. I turned the unit off because as long as I leave it on the process repeats continuously.
I just need to know if the robertshaw gas valve is in corectly on my furnace.. the instructions on the furnace say the same thing for natural gas and propane.the robertshaw gas valve is reversible.im using propane.the instructions don't make any cents...
I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...
Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
