Ask Experts Questions for FREE Help !
Ask
    bcerickson's Avatar
    bcerickson Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 11, 2011, 05:23 PM
    Burners ignite, blower does not come on
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Feb 11, 2011, 06:42 PM

    Red light blinks? Just kidding but this is what you get when you don't give any details or full sentences. This is not a search site, we are human and can only give answers based on info you give us. Furnaces have code lights which are usually visible through a peep hole on the front panel. Look at your and record the color and number of flashes or steady lights. Open that panel and look for a chart that matches the code you saw, then come back here

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane XE80 furnace. Blower stays on. Burners ignite, then turn off. This is continuou [ 11 Answers ]

I have a Trane xe80 furnace. Last night I noticed the blower wasn't shutting off. I reset the thermostat. The blower stays on and the burners ignite for 2 seconds and turn off. This repeats over and over. Can anyone help with this, as it is very cold in Missouri right now. Also the red light...

Trane furnace blower doesn't come on, compressor on heat burners ignite, new stat [ 6 Answers ]

Blower won't run, even in on mode, replaced stat, still nothing, has power to motor, can turn cage freely, furnace led light says system normal, compressor for air comes on, heat ignites, just no fan blower, any ideas

Heil 7000 furnace, blower stays on and burners don't ignite [ 14 Answers ]

Furnace Info: -Upflow Condensing Gas Furnace is a Heil 7000 (model# NUGK075DG09) -Electric spark or host surface ignitor ( I think it's spark) -Installed Oct. '96 (when we built the house) -90% efficiency -wall thermostat is honeywell programmable. Don't know model but was also purchased in...

Burners do not ignite [ 1 Answers ]

My gas furnace pilot light will not ignite the burners. Can you help?

Burners will not ignite [ 1 Answers ]

I have a Day/Night forced air heater and the burners will not light. The fan runs but the igniter glow device does not turn red and the gas valve does not open. I have run the on test mode and the igniter glows red but when turned on by the thermostat the igniter does not work. I have checked the...


View more questions Search