 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
We have error codes 22 and 66 on our rheem. Can we reset the limit switch?
It is a rheem contour 90. The fan comes on high but it does not throw any heat. We are having problems finding where the switch is. Is there any way we can do this or do we need a technician to do this for us.
|
||||
Check out some similar questions!
Rheem hot water heater gas. How to reset error codes. Eco code.
Unit is not blowing hot air. The red light indicater is indicating the limit switch is open. Is there a way to reset or test the switch or will it need replacing?The unit is a Auto ignition Furnaces G8C/FG8 series. Installed almost 8 yrs ago. Your prompt attention will greatly be appreciated. I in...
I have a Rheem furnace Criterion II that will not blow air. I can hear the gas flame kick in but the blower never starts. The LED on the control board blinks 3 times then off for 2 seconds which is suppose to indicate limit switch open. Should I rely on this and replace the limit switch? Is their a...
I have a Kenmore special edition DW mod#66513793 full of water and there are 4 lights flashing on it. The noraml wash light was flashing when I got home so I tried to hit the start button and it started flashing too. Then I tried to hit the cancel button and that started flashing but faster as...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
