Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Uneven floor around closet toilet flange
[ 2 Answers ]
I am replacing the seal on my toilet and the subfloor is uneven around the closet flange. The toilet was originally placed on a seam in the subflooring--very small bathroom only place that the toilet would fit-I guess. What do I do know? Rubber shims? Is that going to work. I am replacing the...
Installing closet flange where old flange top non existent
[ 3 Answers ]
I am flooring in the basement bathroom and need to be able to set the toilet at a higher level. The flange part of the flange has been removed - there is now a pipe with the tubular part of the flange glued into it. How do I install a new flange with the appropriate extensions?
Hole in floor is larger than closet flange, and the flange may be too low
[ 3 Answers ]
We recently put down ceramic tile in one of our bathrooms. A friend of ours did the job for almost nothing, as he had most of the required supplies left over from another job, including tile. Now there is water leaking from the base of the toilet. After scouring the DIY sites on the internet, I...
How do I attach closet flange spacer over old flange
[ 1 Answers ]
I recently installed a new tile floor in my bathroom, and in doing so, raised the level of the floor. I went out and purchased a closet flange spacer kit and it came with the spacer and two rubber gaskets. I need to know how to attaché these. So I put the first gasket on, then the spacer, then do I...
Closet flange on uneven slab
[ 3 Answers ]
The cement within a ring of about 3 or 4 inches around the soil pipe is uneven. There is a slight grade up toward the pipe. The grade is about quarter to a half inch. Do I need to grind this down a little or do I try to float some leveling cement around the pipe to get a better area to put the... View more questions Search
|