Ask Experts Questions for FREE Help !
Ask
    Oops2's Avatar
    Oops2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2011, 06:08 PM
    I put keresene in my snowblower and now it won't start?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Feb 4, 2011, 06:12 PM

    Not surprised. Unless you had a diesel powered snowblower.

    You are going to have to COMPLETELY drain the tank fuel line and carb... no other way to do it...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

9hp craftman snowblower, new spark plug, gas, oil and carb rebuild,won't start. Junk? [ 2 Answers ]

2009 snowblower.won't start w/elec.start.the rope pull won't reciol. What do I do [ 2 Answers ]

Have 1 yr. old sears snowblower.oil good,gas full.rope is stuck,won't recoil,have it hanging on handle.tried elec.start.sounds like it wants to start but won't.is it because rope pull won't coil back into place or something else.under warranty but I have to bring it to sears.no truck.please...

Craftsman snowblower won't start [ 9 Answers ]

Craftsman snowblower electric start works, spark plug OK, carb has gas, primer is OK It just keeps revving but won't turn over and start up

My jeep turns over but won't start. It will run when I put starting fluid but won't run [ 2 Answers ]

My Jeep will will turn over but won't start. I changed the "O" ring in the injectors cause I heard that might be a problem, still nothing. It will start when I spray starting fluid but will only run until it burns through the fluid.

Put new flywheel on now it won't start kicks back timming? [ 7 Answers ]

Have a crafsman riding mower 17hp I think had to put a flywheel on it now it kicks back and and shears off the flywheel key done it twice now?? Any help valves? This thing is only 2 years old not heavy use.? Help me thanks..

View more questions Search