Ask Experts Questions for FREE Help !
Ask
    ssnook's Avatar
    ssnook Posts: 4, Reputation: 1
    New Member
     
    #1

    Feb 4, 2011, 02:36 PM
    Firewall penertatoion with flexable metal conduit is it permited ?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Feb 4, 2011, 03:41 PM
    There are 2 questions. 1-What is the rating of the firewall and 2- is the flex conduit rated for that time? You could have a 3 hour wall but conduit rated for 1 hour. In that case no. Or, you could have a 1hr. Wall and conduit rated for 2 hrs. In that case yes. You need to gather a little more information.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

PVC or Metal conduit into a subpanel? [ 4 Answers ]

Hello, I'm installing a 200 amp subpanel in my barn, and am using 2" PVC conduit (buried) from the house. As I was going into the barn, I got to thinking that perhaps metal should be used above ground (in the wall feeding the panel). I would prefer to use the 2" PVC, all the way, but was...

3 wire plus metal conduit as a ground for a range [ 4 Answers ]

I am installing a new range. I have a three wires coming out of a metal conduit which is properly connected to a 60 amp breaker. I have a three wire cord and a grounded surface mounted outlet. I assume that the ground will connect through the metal conduit. THis will ground the outlet. How do I...

Can I Use Galvanized Metal Conduit as the ground for a sub panel in same building? [ 5 Answers ]

I have an old 60 AMP circuit to a stove/oven receptacle. The home run from the main panel to the stove receptacle is in a 3/4" Galvanized Metal Conduit pipe containing 2, #6 and 1, #4 wires and NO GROUND wire. The new stove/oven requires only a 40 Amp breaker (not sure of the potential maximum Amp...

What size metal conduit should I use? [ 2 Answers ]

I have a cable 1.1 Inches in diameter. The National Electric Code says that a metal conduit cannot be filled more than 60%. It must have 40% of its space free. What size conduit should I use?


View more questions Search