 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Garage door opener works fine. Opens from wall. Need to know where the remote code is in the opener since the remote works fine. Took off cover and cannot find schematic for where the code for the remote is inside the opener. Need the coding for the remote or where it's located in the unit.
The lamp (not LED) that is mounted on my garage door opening unit turns on and off by itself when we open the garage door. It does not stay on for the designated time either, when I close it. The garage door opens and closes fine. Any advise on how to fix this problem will be extremely helpful....
I have a Overhead garage door opener, Legacy Model 696CD/B. The garage door is stuck in the up position and will not close. The red sensor light flashes 3 times, pauses over and over. There is nothing obstructing the sensor and I switched the red sensor with the other door sensor and it works on...
Furnace is a utica standing pilot gas unit I replaced the themocouple the boiler fired up. It seemed to be working but after running for awhile the gas valve shuts off and the boiler won't come back on. If I shut the gas turn off the pilot and relight the pilot the furnace kicks back on
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
