Day and night blower doesn't come on when I call for heating

stevendiazzz Posts: 1, Reputation: 1

New Member

Jan 28, 2011, 06:50 PM

Day and night blower doesn't come on when I call for heating

Could it be the tdr?

T-Top Posts: 1,871, Reputation: 100

Ultra Member

Jan 28, 2011, 07:15 PM

If it's a fan coil yes it could very easily be a fan control board (TDR)thats bad. You didn't give us much info to go on .

Add your answer here.

Check out some similar questions!

Heating question: Day and Night Furnace malufunction [ 0 Answers ]

The fan on my Day and Night Furnace (heat on demand system, no pilot light) runs continuously blowing cold air. The ignitor and the ribbons of flame went out through the night. After several attempts of following the lighting instructions it finally the fan did not come on immediately, the heat...

Day + Night furnace blower only comes on with no heat [ 18 Answers ]

Hello and Happy New Year... We have about a 15 year old Day + Night furnace that only the blower comes on with no heat... Is there a way to test the limit switches? There is 4 of them in the furnace.. There is a small square button in the center of all of these switches.. I wanted to test these...

Day & Night electric furnace not heating well [ 1 Answers ]

My Day & Night 517E electric furnace runs a long time and does not heat as well as it used to. This is relatively recent. The air from the registers _seems_ cooler and the furnace does not reach it set point most of the time. During the day, it will sometimes get to the set point, but at night,...

Day & night furnace not heating [ 1 Answers ]

Hi I have a day & night furnace not heating, I took a class in 2002 and learn some but have not practice much and now my house is cold and I like to fix it myself. The unit would not heat up so I opened the unit up and found a code for flame roll out sensor bad so I replaced it same rating 350 as...