 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heating question: Day and Night Furnace malufunction
The fan on my Day and Night Furnace (heat on demand system, no pilot light) runs continuously blowing cold air. The ignitor and the ribbons of flame went out through the night. After several attempts of following the lighting instructions it finally the fan did not come on immediately, the heat source lit and then the fan came on. Does anyone have any idea what happened through the night?
|
||||
Check out some similar questions!
My Day & Night 517E electric furnace runs a long time and does not heat as well as it used to. This is relatively recent. The air from the registers _seems_ cooler and the furnace does not reach it set point most of the time. During the day, it will sometimes get to the set point, but at night,...
Hi I have a day & night furnace not heating, I took a class in 2002 and learn some but have not practice much and now my house is cold and I like to fix it myself. The unit would not heat up so I opened the unit up and found a code for flame roll out sensor bad so I replaced it same rating 350 as...
Have a Day & Night air/heating unit 1994 date need to find control mod. How to find Manufactor to locate mod.
Good afternoon all, I have a problem with my Day & Night Central Heating Unit. Last night it just would not kick on the heat. No matter how high I turned the thermostat up, it still would not kick on. I removed the front panel and the pilot is still lit. It maybe the thermostat, I'm not sure. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
