Ask Experts Questions for FREE Help !
Ask
    rluker's Avatar
    rluker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 26, 2011, 10:32 AM
    Inertherm E2EB-017HB
    Does the intertherm e2eb-017hb have a reset switch. Mine suddenly stopped working and I have replaced the thermostat with the same results of no fan, heat or cooling

Check out some similar questions!

Nordyne model E2EB-017HB [ 2 Answers ]

Unit will not heat. Replace t stat and both magnetic contactors. Have 28 volts to red and yellow on t stat. what else can I check?

E2eb-012ha [ 1 Answers ]

My e2eb012ha system became dirty and leaked water all down on electric componets don't make sense why put electric componets underneath evaporator anyway tried to replace all electric componets go wires mixed up wireing diagram unable to read can anyone help me with a wiring diagram for this unit?

E2eb-015hr [ 16 Answers ]

Furnace stopped in middle of night. Checked the thermostat, don't think there's a problem there. No breakers tripped, but I reset them anyway. Still no heat. VERY COLD! Only about 15° outside. Please help!

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Nordyne e2eb-017HB blower will not stay on more than a minute [ 6 Answers ]

Nordyne e2eb-017HB. Replaced blower motor, capacitor, both fan relays, contactor &, transformer in the inside unit. The compressor and fan outside runs. Inside blower will come on with auto set on t-stat to cool, for about a minute, then shuts off, for another 7 minutes, then comes back on. The...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.