 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
If it is only in 1 sink, the washer may have come off the stop valve and blocked the pipe. Turn off the water to the hot water heater, release the pressure and remove the valve. Look for a blocked hole. If that is the issue, replace with a 1/4 turn ball stop.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a single faucet sink where the cold water pressure is fine and all other sinks have good hot and cold water pressure. I replaced the kitchen faucet two years ago along with new lines. As of late I'm getting very little hot water pressure along with having to run the water for about 10...
I need to replace my single lever kitchen faucet but both the hot and cold shutoff valves do not work. If I shut off main water to the house the cold water does not run but the hot water keeps running. What do I need to do to shut off the hot water.
I need to connect my household water supply to my new Frigidaire refrigerator, using 1/4" copper tubing. The kit I bought from Home Depot contains a self-piercing saddle-type shut-off valve. However, the instruction manual that came with the fridge says "DO NOT use a self-piercing type shut-off...
It may be an isolated incident, but this may have been pressure related. My house is about 12 years old and we have had some cold weather here in NC. It appears all of the bathroom cold valves have leaked about a cup of water. They aren't runnning constantly, but they will drip when the water is...
Help! The hot and cold water coming out of the kitchen sink faucet are never really "hot" and "cold"... always lukewarm-ish. I've tried messing with the valves underneath the sink, but I don't know if they are both supposed to be open all the way or if one should be open and the other closed......
View more questions Search
|
