 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Chart for selecting size of capacitor for a)motor starting b)power factor correction
Will any member provide charts for selecting power capacitor for a)power factor correction
b)starting of 3phase squirrel cage induction motors of various HP and RPM? Does the design code influence the selection? Give a link if possible to down load |
||||
Check out some similar questions!
dear friends, i would like to know what will be the starting power for a motor. i have heard that it will take almost double the power while starting. is it true. is it different for single phase and three phase motor. what is the concept and how is it calculated. if i want to put solar...
I recently purchased a used Craftsman air compressor. It was bought at a yard sale, and the man said he it did not run, and has not been tested. I brought it home, plugged it in, and it ran fine for several days. I drained the air out of it to open the valve and drain the moisture out of the...
a)the equipment produces more power? b)the equipment uses less energy? c) less current is used? d)less voltage is needed?
general electric motor, direct drive, 5uf cap First check: when heat exchanger reached temp, the relay clicked but the blower fan just hummed. The bearings seem OK as a slight push causes a rotation that continues for some time. Also, such a slight push causes it to run fine for the cycle. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
