 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat runs continuously with Aux heat.
I have a 2 year old Trane system with a Honeywell thermostat. During the cold months the system runs continuously, never stopping during the night. On top of this, the Aux heat will come on quite regularly even though the thermostat has maintained the desired set temperature. This is frustating seeing that the unit is so new. The company that installed this system came out and checked the system, couldn't find a problem, so installed a shutoff switch for Aux heat so that I could control it manually. To me this is a "band aid" fix. Any help and advice much appreciated.
|
||||
Check out some similar questions!
10 year old Rheem air handler RHBA-21J8MFCA, 1/3HP, 2.8A. New WeSt Columbia, SC 29170, Model 2HP13L48P-1B, HCFC-22, 4TON. Installed new out of box iN July and AC working splendidly but start-up is "violent" and loud. Installer says I need some sort of "start-up kit". I put off as had planned...
The temperature outside is 98 f the thermostet is set at 78 f the unit is only one year old but seems to run continuously until outside air temp drops then it cuts off until it starts again
1)I live in the Raleigh, NC area. Is the heat pump still considered efficient when it continues to run, and if so, how? 2)At what temp should the heat strips usually be turned on?
I have tried to install Honeywell 7500d thermostat. I get heat pump heat but no emergency heat although the termostate is calling for it. The installation manual says to see authorized agent if I have a dual 0/b on existing thermostat and another wire is attached to common. As of now, I have ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
