Ask Experts Questions for FREE Help !
Ask
    khelms's Avatar
    khelms Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 22, 2011, 12:57 PM
    Washer problem
    It fills and then it stops but if you move the timer manually to rinse the agitator will work there. Why won't the agitator work on the wash cycle? Would that be the timer control knob?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 22, 2011, 03:10 PM

    Certainly sounds like a defective timer. Replace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer problem [ 8 Answers ]

Our kenmore is working fine but in past day it seems the agitator is starting to slip under load. Seems like a retainer nut or such has worked loose and under load the agitator just slips as the spindle inside clicks around doing its job. Under light load it works fine. Can you tell me how to...

Washer problem [ 1 Answers ]

My washer has a code coming up when I push start. The code is F3. What does this mean?

I have a maytag bravos washer. I have a problem that when my washer is in rinse mode [ 0 Answers ]

I have awasher it's a maytag bravos, it fills with water when on rinse mode but does not kick on to spin mode it shuts off with an error code that reads ol on the screen and makes me start over again.what can I do

Washer drain problem [ 3 Answers ]

HELP the washer is in the basement and drains into a stand pipe.. it's the last thing on the line.. for 15 years no problem.. now there are times when water comes up out of the standpipe when the washer drains.. very inconsistent sometimes no water sometimes 1/4 cup sometimes 1/2 gallon.. we have...

View more questions Search