 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Dishwasher has lost all Power and won't Start
Kenmore Model 665-16493300 stopped in Rinse cycle and will not restart. No power to digital controls, no lights, nothing. Power connections seems fine both externally and internally. Have not removed door panel to explore thermal fuse, control panel, etc.. . But that is my next thought. I have the original manual and repair parts list, but I noticed that there is no part listed for the control panel. Only the wiring harness, the thermal fuse and the "user interface" show up in the manual. Anyone know how to get a new control panel if that is the problem? Wondering as well if it could be the fuse and if so is that an indicator that the coil is overheating because water levels are too low? Also, any good way to test the control panel rather than ordering a new one and hoping that works?
|
||||
Check out some similar questions!
My dishwasher was already in a cycle when I pushed the water heat button, It just quite no lights lit up no power at all. It's a kenmore dishewasher ii Model 665.1765592
My dishwasher was working fine one moment and off the next. We just had it serviced 2 weeks ago because the start button was flashing and needed to be reset apparently. Bow it's not working at all and there is about 1 inch of water in the bottom of it. It's an ultra wash quiet gaurd3
Dishwasher was in a rinse cycle when a power failure occurred. It will not restart now. When trying to use any cycle almost every light on front panel comes on. Please help lol
Hi, My Kenmore Dishwasher 665.13833K601 has no power and will not respond to any button pressed. It did not successfully clean the last batch and has failed to drain the residual water. I believe that it might be a blown fuse and am unable to gain assistance from the manual. I appreciate...
Yesterday, my Kenmore 665 dishwasher wouldn't get out the "clean" mode and the only operating was the drain function. I found (on here) how to reset it. That worked. It ran through a test cycle and then I ran it through a full cycle. Once completed, it shut off and now there is nothing. No...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
