Ask Experts Questions for FREE Help !
Ask
    vintagehippie22's Avatar
    vintagehippie22 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2010, 12:39 PM
    No power to kenmore dishwasher
    My dishwasher was working fine one moment and off the next. We just had it serviced 2 weeks ago because the start button was flashing and needed to be reset apparently. Bow it's not working at all and there is about 1 inch of water in the bottom of it. It's an ultra wash quiet gaurd3
    applianceman's Avatar
    applianceman Posts: 30, Reputation: 2
    Junior Member
    		  
    #2

    Jul 15, 2010, 09:10 PM
    Those whirlpool's like to blow their fuses. Start with power to the dishwasher. Breaker, outlet, dishwasher junction box, fuse near main control panel.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher ultra wash quiet guard no power [ 4 Answers ]

The washer will not start, no lights on but power at the socket. Previous cycle was OK and finished fine. Any ideas please.

Kenmore dishwasher 665.15779990 will not start after power failure [ 0 Answers ]

Dishwasher was in a rinse cycle when a power failure occurred. It will not restart now. When trying to use any cycle almost every light on front panel comes on. Please help lol

Kenmore dishwasher 665.13833k601 will not start/has no power [ 0 Answers ]

Hi, My Kenmore Dishwasher 665.13833K601 has no power and will not respond to any button pressed. It did not successfully clean the last batch and has failed to drain the residual water. I believe that it might be a blown fuse and am unable to gain assistance from the manual. I appreciate...

No power to Kenmore dishwasher [ 6 Answers ]

Yesterday, my Kenmore 665 dishwasher wouldn't get out the "clean" mode and the only operating was the drain function. I found (on here) how to reset it. That worked. It ran through a test cycle and then I ran it through a full cycle. Once completed, it shut off and now there is nothing. No...

View more questions Search