Ask Experts Questions for FREE Help !
Ask
    Bri83's Avatar
    Bri83 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 21, 2011, 11:40 PM
    Hunter ceiling fan and light control model 27186
    I have the hunter ceiling fan and light control model 27186. The button for the light still flashes green when I press it, but it won't turn the light off. The fan buttons work fine. Troubleshooting on the site recommends replacing the battery. Which one, the one in the wall controller (a23) or the receiver up in the fan? Or should I just buy a new fan and light control to install?

Check out some similar questions!

Help with wiring a HUNTER Ceiling Fan and Light Control [ 16 Answers ]

I am currently replacing a light switch with a ceiling fan and light control. The description of what I am replacing with is: http://www.littmanbros.com/pd_hunter_27182.cfm I currently have a ceiling fan with a light kit (and it too high off the ground to have the fan controlled by a pull...

Installing a hunter ceiling fan & light control to operate my fan w/light [ 3 Answers ]

I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...

Want to purchase Hunter ceiling fan & light control (p/n 84368-060) [ 4 Answers ]

Where can I buy a Hunter celing Fan and light control model # 27185-060, part # 84368-060? My existing unit is burned out due power line surge. Please note that the remote control, which has the same model number as shown above, seems to be fine. Thank You. Bhagwan Samyal

Hunter Ceiling Fan - replacement Fan and Light Control Capacitor Model # 27185-060 [ 1 Answers ]

I need this replacement part (part number 84368-060) and do not know where to locate one. I have looked on web sites to no avail. Any ideas??

Hunter wall mount fan & light control (model 27186) [ 2 Answers ]

The Hunter wall mount control has two black wires and one green wire. How do I know which black wire goes to the black wire from the wall and which goes to the white wire from the wall? Or doesn't it matter which wire is connected to which


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.