Ask Experts Questions for FREE Help !
Ask
    bsamyal's Avatar
    bsamyal Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 2, 2009, 05:47 PM
    Want to purchase Hunter ceiling fan & light control (p/n 84368-060)
    Where can I buy a Hunter celing Fan and light control model # 27185-060, part # 84368-060? My existing unit is burned out due power line surge. Please note that the remote control, which has the same model number as shown above, seems to be fine.

    Thank You.

    Bhagwan Samyal
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Oct 9, 2009, 12:55 PM

    You might have to get a new remote/receiver kit. If not, Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats sells replacement parts.
    bsamyal's Avatar
    bsamyal Posts: 2, Reputation: 1
    New Member
     
    #3

    Oct 9, 2009, 05:57 PM

    Hello,

    I am not looking for a new Hunter ceiling fan. So you suggestion to buy one is no help.

    I called Hunter and the customer service lady said that the part # 84368-060, which I believe is the remote conrol receiver located inside the fan near the celing, is not in their system. But their part # 843680100 would work. I don't know if it would work, but I have ordered the above part. I have to wait for one and one-half months for delivery though.

    I am hoping that my remote controller, which is not physically connected to any thing, is unaffectedd by the power surge and is functional.

    Thanks,

    Bhagwan Samyal
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #4

    Oct 14, 2009, 09:55 AM

    The remote itself should not be affected by the power surge.
    hunter1414's Avatar
    hunter1414 Posts: 1, Reputation: 1
    New Member
     
    #5

    Aug 14, 2012, 06:50 PM
    Is their a kit to take lights off model 28683. The lights on this model have to be attached to work?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help with wiring a HUNTER Ceiling Fan and Light Control [ 16 Answers ]

I am currently replacing a light switch with a ceiling fan and light control. The description of what I am replacing with is: http://www.littmanbros.com/pd_hunter_27182.cfm I currently have a ceiling fan with a light kit (and it too high off the ground to have the fan controlled by a pull...

Hunter ceiling fan Remote control replacement. [ 22 Answers ]

This is driving me nuts. OK I know where the b and w wires go from the fan to the receiver also the " one " that says light out " which is red. What I have left on the receiver is Fan out and Common out. From the fan there is a brown wire by its self and a bundle with red, yel, gray,...

Hunter Ceiling Fan Control Smoking [ 9 Answers ]

I installed a new ceiling fan and control (with dimmer and 3 speed fan setting) a little over 2 weeks ago. It has been operating fine until this morning. The fan and light were both on and the switch made a popping sound and started smoking. I quickly shut off the circuit and it has remained...

Reprogramming a Hunter Ceiling Fan Remote Control [ 1 Answers ]

How do I reprogram a Hunter ceiling fan remote control #85095-01?


View more questions Search