 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell Smart Valve (SV9541M) - LED Indicator - 3 Flashes
I've been having trouble with my heater. When I turn it on, I only get cold air blowing even though the temperature is set at 71. I checked the heater out and noticed the Honeywell Smart Valve's indicator light wasn't blinking constantly. I looked it up and it says that the pressure switch (I have a single pressure switch) is open and should be closed.
This is where I need help. What do I have to do in order to close the pressure switch? Thanks for your help in Advance, Mike |
||||
Check out some similar questions!
My Coleman furnace flashes 7 times (ignition lockout due to retries). If I turn my programmable thermostat off and back on, the furnace will run for awhile (ignites and blower comes on) but doesn't get to or stay at desired temp.
Ducane furnace with ST9160B control card : I have a Smart Valve (SV9520H) that seems to pass all tests and shows nothing is wrong (according to indicator flashes) Hot surface Ignitor glows, valve solanoid clicks to allow gas to come out but nothing comes. I disconnected Gas and tried to blow...
I have a Tempstar furnace and what is happening is the furnace will call for heat and the draft inducer motor will come on and after a momont I will hear the pressure switch go and nothing happens. The electric glow rod does not glow and the furnace does not fire but here is the catch the first...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
