 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace Having problems
Hi,
I have a Carrier Heating Furnace. Lately it hasn't functioning properly. For example, when its in "off" mode, and after I increased the temperature (from 17 C to 25 C), the furnace having trouble to operate, it still in off mode - I waited for 5 minutes and its still in "off" mode. I had to manually switch OFF and ON on the switch-circuit in order to turn the furnace "ON". Anyone have any idea why and how will it be fixed? Thanks in Advance |
||||
Check out some similar questions!
I have a G26 Elite Series Furnace. The inducer motor comes on as well as the flames for about 1 minute and the Blower Motor comes on for about one second and everything shuts down, flames too. It repeats the above cycle and then blower stays on and heats the house. I have cleaned the Flame sensor,...
My furnace starts up and shuts down, we replaced the thermostat thinking it was that. My husband said it looks like its not inginting the flame. You can hear the blower blowing cold air nothing more. Please help this unit I believe is 6 -7 years old.
Hi My furnace stopped working this morning. It's 8 degrees here in Michigan... brrrrr. :( I checked for an error code but the LED light was on continuous. The problem was that the furnace was on (flames going) but the fan would only stay on for about 2 minutes and then turn off. I had...
I Manage a Apartment Community, most of the Apts have the York Furance. We are having propblems with the York Furnace pilots staying lit. I need some advice on what to do to correct the problem.
I have a Comfortmaker furnace Model GNJ100N12C1 to be exact that will not turn on. We turn the thermostat to auto nothing turn it to fan nothing.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
