 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a newer xv80 trane furnace, live in CO, and have had issues with the upstairs bedroom not warming up (there is no cold air return in the room). I looked at the dip switches and put my fan up to high from medium low factory setting. At first I thought the air was blowing the heat "faster"...
What factors should be considered in selecting between these two models? Is it also true that the 95 AFUE models are more complex and more prone to problems?
Trane xv80 starts and runs fine... there is nice blue flame, everything is blowing, then the main blower quits, flame keeps going until safety device shuts it off. This is all with fan in auto or on position Without call for heat, fan runs all day in on position, and does not run in auto...
Trane XV80 Installed 2002 My blower does not come on; I turned t-stat to fan only; fan motor felt cold to touch and turns freely when spyn: defeateded the safety switch on front; checked voltage at the leads from the circuit board to fan motor for the white and black leads(124 v); Should I...
Main blower mysteriously stopped working on Trand XV80. I've gone through the owner's manual. No fix. Vent blower works, flames present, no main blower. 16 Months old. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
