Ask Experts Questions for FREE Help !
Ask
    comala57's Avatar
    comala57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2011, 01:15 PM
    AC/Heater won't run after new thermostat
    I installed a Hunter touch screen thermostat and now nothing turns on. I was using a basic Honeywell and wanted to cut back on costs and bought this program unit.
    I used matching color to letter for my 6 wire hook up that match my other unit. Also same as manual diagrammed. First day the fan blew but the heat wouldn't turn on and outside unit never kicked on, just the inside fan. Called Hunter 800 number and we did some troubleshooting and ended up worse than I started. Now when I change the temperature on thermostat clicks but the fan won't even come on now. I reset fuse breaker on inside unit, breaker in garage and even the breaker next to the ac unit outside, with no luck.
    I am fed up with the Hunter and will just pay more for a Honeywell but what can I do to get the heat on for now? My old thermostat isn't even kicking on now either. AHHHHHH!
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 12, 2011, 02:11 PM
    It probably won`t work with the Hunter tstat,, they are junk. If you do get it working you will be lucky if it lasts 6 months to a year. Hopefully you can take it back and get yourself a good Honeywell.they sell touchscreens also if that's what you want.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox heater won't turn off emergency heat continues to run regardless of thermostat [ 0 Answers ]

Thermostat set to 70 yet temp continues to climb (80+). Can't trun off with thermostat switch, must go to air handler and turn CB offand then back on. Then can only get control by placing thermostat to EMER. Then temp responds to what is set in thermostat (both on and off). When going back to...

I have a Goodman heater model #PGB030050-1 I turned on the thermostat to run (90)an [ 2 Answers ]

I have a Goodman heater model #PGB030050-1 I turned on the thermostat to run (90)and the heater made a snapping noise as if the igniter was trying to spark (did not see a spark). The burners are not red or flamed. The igniter did not fire up the burner. When I feel that the unit is trying to purge...

New old crane gas heater 80.000 BTU won't run [ 13 Answers ]

Hi out there hope someone can help Ive got a crane gas heater in my garage It was never used since bought it was my dads for his garage I put it in my garage hug it plumbed gas line from house to garage it has a honeywell Thermistat wired I can lite the piot but the main burners won't come on...

Outside unit won't run - new thermostat [ 5 Answers ]

Hi everyone, I just joined the forum and glad to see folks willing to help out. I installed a new thermostat on my aircondition up at our camp. It had an old Honeywell tstat and I replaced it with a White Rogers digital. After installing it, it work fine. Heating and a/c unit came on, no...

Why won't the thermostat will run heat on auto ? [ 1 Answers ]

My unit will not heat up and it will not on auto

View more questions Search