Ask Experts Questions for FREE Help !
Ask
    tissertell's Avatar
    tissertell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 11, 2011, 03:31 PM
    Looking for Classic Collection outside wall lantern light mount screws?
    I am looking for two outside mounting screws for my Classic collection exterior wall lantern light. Model # 885-783. The color is black finish. I just need the screws to mount it to the house. Thanks, t
    I have the bracket, not the screws that mount to the base of the light fixture.
    Any suggestions?
    aguywithfeet's Avatar
    aguywithfeet Posts: 29, Reputation: 3
    New Member
    		  
    #2

    Jan 11, 2011, 05:29 PM
    Depending on the size of the box in the wall it could be a 6-32,8-32 or possibly a 10-32 machine screw. They are sold at all the major hardware stores. I would start with a 6-32.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to mount a wall mount pot filler [ 3 Answers ]

I was thinking about installing a wall mounted pot filler in our kitchen. What type of fitting and mounting does this require. I am using ½” copper to a thread male. I will secure the pipe to the stud. Is this correct. How far out does the thread need to stick out of the wall.

Hampton Bay Motion Sensor Wall Lantern [ 0 Answers ]

I have 2 Hampton Bay Motion Sensor Wall Lanterns No 755 571, and would like to know how to change them from motion sensor to regular switch on and off which I had before

Hamilton Bay Motion sensing Wall Lantern [ 1 Answers ]

I just purchased the subject lamp and can't get it to sense motion. Can someone help. The address of Hamilton Bay would also be valuable.

My wall mount propane heater gets gas & sparks but won't light [ 4 Answers ]

My wall mount propane heater gets gas & sparks but the pilot light won't light unless you hold a flame to it then it doesn't stay lit much less start the burner.It is a simple design but I don't know what is wrong unless it is the thermostat wire @ the pilot is bad.I don't think it can be...

Hunter wall mount fan & light control (model 27186) [ 2 Answers ]

The Hunter wall mount control has two black wires and one green wire. How do I know which black wire goes to the black wire from the wall and which goes to the white wire from the wall? Or doesn't it matter which wire is connected to which

View more questions Search