 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Evcon Furnace Blower
I have an EVCON Furnace Model LM8S080B16UH11C. This is not a new problem, it is just finally getting attention. I have no fault codes, except the code that says everything is all right. What I do have is the blower coming on before the furnace lites, this gives me cold air before the furnace lites. Any idea's as to why?
|
||||
Check out some similar questions!
I have a Coleman Evcon unit.I have to manually spin the blades of the fan to make it kick in and work... could the shroud around it be keeping the blades from spinning ?
I have a Coleman Evcon heating and air conditioning unit, model # DGAT070BDD, year 1996, in my double-wide trailer home. It is making an odd beeping noise, something like an alarm. I can't seem to find a manual to help me diagnose the problem. Any thoughts to help me?
The blower stopped running 'I opened it up to check for loose wires found none,you could hear the blower w anting to run, so I reached in and spun the blower wheel and it started blowing but very little 'will heat but not like it should.saw compacitor on the blower housing but need help.
I just installed a programmable thermostat for an electric Coleman Evcon furnace. Now when the furnace comes on the blower also comes on. Sometimes the blower goes off a minute or so before the furnace stops. It never did this before- in fact I didn't even know there was a blower. Do I need to...
I have an Evcon mod. CGU09516 furnace. Upon starting it seems to work OK. But when blower motor cuts in the flame cuts out.After doing this 2 or 3 times it cuts out and will not cut in anymore. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
