 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman evcon electric furnace model # eb2ob the blower stopped
The blower stopped running 'I opened it up to check for loose wires found none,you could hear the blower w anting to run, so I reached in and spun the blower wheel and it started blowing but very little 'will heat but not like it should.saw compacitor on the blower housing but need help.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Model EB10B The problem I have is that the furnace runs fine during the day kicks off and on keeps house warm. (Mobile Home) Then sometimes in the evening the thermostat shows system on but furnace not running, and like this morning I woke up and the thermostat was set @70 and house was 60. What I...
I have a Coleman Evcon electric furnace in a mobile home I rent. Recently a wire had burned off which caused it to produce no heat. After they sent a repair man to work on it I now seem to not have as much air force coming out of the registers. Also it takes 20 minutes to raise the temperature one...
We have a Coleman Evcon electric furnace that's heating, but not much. If you put a hand right over the vent, you can feel the warm air, but it's not nearly enough to heat the house. Any suggestions?
I just installed a programmable thermostat for an electric Coleman Evcon furnace. Now when the furnace comes on the blower also comes on. Sometimes the blower goes off a minute or so before the furnace stops. It never did this before- in fact I didn't even know there was a blower. Do I need to...
How do I know or rather how can I check to see if the repairman cut off one of the heating elements and where are they located?
View more questions Search
|
