 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I can hold the points on the presher switch and get the pump to humm but it will not pump up.I have put new starter relay,satart capaciter and overload switch my well is a submerged well I don't no how deep it is can I prime the pump.could my presher switch not kick the pump on even if I connect...
I have a humm on my home landline phone. I have gone to the csu box on the side of my house and lifted the leads coming into my house. I go directly on the leads coming into the box from the telephone pole and still hear the humm. It gets worse when it rains. I have contacted my service...
Hello, I have a Frigidaire Dryer made built in 1996 model (canada) FD975ES0 8 cycles who has stopped running. Basically on the last drying cycle it stopped and I noticed unusual amount of heat. Not sure the cause but did check exhaust and filter for unusual amount of lint but was pretty clean....
about a year ago I purchased a Kenmore Elite HE 4 dryer about a month ago the touchpad controls were not respoding after several hours latr=er it sarted working again. I thought something neededto be reset but it has happened again. Does anyone have any idea what the problem is and how to fix it....
I am installing a Marley series 2500 baseboard heater (220V) with Marley single pole thermostat mounted at the heater. The heater works but there is an annoying buzz when it is heating. Is this inherent in the heater, or have I connected it incorrectly? Double size breaker, through switch at wall...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
