 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why does my well pump just humm?I've replaced all copnants
I can hold the points on the presher switch and get the pump to humm but it will not pump up.I have put new starter relay,satart capaciter and overload switch my well is a submerged well I don't no how deep it is can I prime the pump.could my presher switch not kick the pump on even if I connect the leads?
|
||||
Check out some similar questions!
Laundry tub pump leaks is there a seal that can be replaced?
Hi . My pump was 20 years old and had worked fine for that time . Thinking perventive maintainace , I had the pump changed . When this was done , the well repair man removed the 5 gpm flow restricter { dole flow valve } . Three months later , the new pump quit and the well was full of very fine...
Today I woke to no power to thermostst. Through this site I found out about the transformer. Check power to transformer good 120volts each wire. But no voltage out. Replaced transformer. Wired red to red and white to white incoming power. And blut to black blue and red to black red out coming....
I just replaced my water pump. When I turn on all the faucets in my house the kitchen faucet just drips, both bathroom showers run okay, the sinks in each bathroom run but very low. All the faucets run clear for a few min. then have brown stuff coming out. What could be wrong now? Please help...
Please tell me its going to be ok… I found my pump for the septic was bad . It would keep popping the circuit breaker. The tank it was in looks 4 feet wide and 7 feet deep. I would say it had 4 feet of water. I am guessing but I would say the pump was out for at least 2 weeks. After I replaced it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
