 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Goodman PHK060-1 Indoor Blower Delay Problem
I have a Goodman PHK060-1 heat pump. Just recently I have been having a delay after the unit fires up. The outdoor blower starts, and the indoor blower starts anywhere from virtually instantly to five minutes later. Generally speaking, it *seems* like the longer since it has run (and possibly colder), the longer the delay.
Here's a link to the parts for this model. I'm thinking this part is defective and should be replaced. I'd appreciate some advice. Thanks! |
||||
Check out some similar questions!
Hello, I have a goodman system and it freezes up when blower fan stops working. I have been told told it is the goodman time delay fan switch. Does this sound correct.. How much to fix and is it a diy project.. Thanks in advance.. :)
I have a builder installed Goodman GDS80904BHA that is approximately 5 years old. Recently, the furnace seems to be shutting down and "recycling" before the call for heat has ended. Here's what's happening: 1. Call for heat. 2. Draft inducer starts. 3. Ignition glow plug starts. 4. Gas valve...
Where are the power vent really and the indoor blower relays located in the Goodman GMP100-3 furnace. According to the repairman these needs to be replaced because the contacts may be bad
Hi, I am so new to this I'm in diapers, so please forgive my ignorance. I found out by reading other topics in this forum how to check if my a/c was working, and I did get it to come on (outside) by crossing Y and R. The blower (indoor) was working only in the ON position. I couldn't get to the...
Hi, My indoor blower quit working, first it made weird sounds during start few times and then quit. I have a Rheem Criterion furnace from 1992. The air handler and evaporator was replaced few years ago and other maintenance done. The run capacitor (Old one was a cylindrical 15MFD 370VAC...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
