Ask Experts Questions for FREE Help !
Ask
    JeffDaugherty's Avatar
    JeffDaugherty Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 1, 2011, 07:20 PM
    GE model GSL25IFRF BS the light in the panel dims and the compressor will turn off
    My GE side-by-side model GSL25IFRF BS stopped dispensing water and ice. When you push the lever, the light in the panel dims and the compressor will turn off. I replaced the water filter, and that allowed it to dispense the water, yet it still causes the panel to dim and shut off the compressor.

Check out some similar questions!

GE refrigerator model GSL25IFRF BS will not dispense ice or water [ 8 Answers ]

My GE side-by-side model GSL25IFRF BS stopped dispensing water and ice. When you push the lever, the light in the panel dims and the compressor will turn off. I unplugged it over night and now the fridge just clicks and the compressor doesn't sound like its kicking in. Help!

When my home ac turns on the outside compressor and fan turn on then turn off [ 1 Answers ]

When my ac clicks on the outside compressor and fan turn on then turns off. When it runs the air is cool

Ceiling fan light on, dims to bright, dims to bright. [ 2 Answers ]

I have two Hampton bay ceiling fans with lights. The upstairs unit has decided to have the light come on and what it does is get bright, dims down goes off and comes right back on. The remote only shuts it off for a moment. If I hold the off button on the remote down the light stays off. Switched...

Ceiling fan light automatically dims and brightens and dims and brightens [ 2 Answers ]

I installed a new ceiling fan, it came with a remote. Installed a second in another room, and bought an add on remote control. In still another room, I added an add on remote control to an existing fan. All worked great for a week. Suddenly, none of the remote controls work, and the...

Light dims when saw is run. Follow up [ 1 Answers ]

I ran the sub panel, which has slots for 2 breakers, from a 40amp dual pole breaker which was used to run an old pool pump using the existing wire which is "AWG 12 cu2 CDR with AWG 12 ground type UF-B 600 volts" the distance is about 75 feet. Additionally, I have the sub panel set up to run two 110...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.