 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite gas dryer mod 110.950814.02
No lights or function from control panel... last thing I had happen was the 'end of cycle signal' was going off constantly and flashing from high, low to off. Dryer worked find, light inside comes on when opening door. Today ( next day ) it won't trun on at all, held down same buttons for seconds at a time but no go. Happy New Year!
I'm pretty handy, fixed my washer earlier this year as boot got ripped so some thoughts would be appreciated. Thanks Sean |
||||
Check out some similar questions!
My GAS dryer seemed to have caught on fire this morning. No flames seen just smoke in the house and a burning smell. How do I open the dryer to see if it may be lint or a part that has burnt out?
After you turn it off for a little bit then turn it back on it gets hot for maybe 2 miutes then the heat shuts off. No more heat
I just started to run my dryer when I noticed a burnt smell coming from the laundry room. That was the only thing running (less than 10min). It doesn't seem to smell from behind the unit but it does inside. I always change lint before/after every use. Any idea's?
My 3-yr.old Kenmore Elite Gas dryer has been doing very odd things! After running a load, when the dryer shuts off, or I shut it off (clear it), the touch control panel goes dead. No lights are lit. If you push the touch pad for various cycles it will not do anything. You can also push...
Can anyone help me before I have to pay for my service call on Thursday :( The washer is no longer turning on at all. I've reset the fuse box just in case, made sure that there is power in the outlet; I've unplugged the washer hoping that it would reset; also took the electronic panel off and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
