Ask Experts Questions for FREE Help !
Ask
    Novicetryingtolearn's Avatar
    Novicetryingtolearn Posts: 2, Reputation: 1
    New Member
     
    #1

    Apr 23, 2007, 06:31 AM
    Kenmore Elite MOD 110.22036100
    Can anyone help me before I have to pay for my service call on Thursday :( The washer is no longer turning on at all. I've reset the fuse box just in case, made sure that there is power in the outlet; I've unplugged the washer hoping that it would reset; also took the electronic panel off and ensured that all plugs are secure yet still nothing; any ideas anyone? Your help would really be appreciated.

    Thanks,
    JD
    maka's Avatar
    maka Posts: 39, Reputation: 1
    Junior Member
     
    #2

    Apr 23, 2007, 07:29 AM
    Quote Originally Posted by Novicetryingtolearn
    Can anyone help me before I have to pay for my service call on Thursday :( The washer is no longer turning on at all. I've reset the fuse box just in case, made sure that there is power in the outlet; I've unplugged the washer hoping that it would reset; also took the electronic panel off and ensured that all plugs are secure yet still nothing; any ideas anyone? Your help would really be appreciated.

    Thanks,
    JD
    If the unit is less than a year old, you should not have to pay for the repair. Try resetting again by cutting the circuit breaker for 15 to 20 minutes or try plugging a dryer into the plus to absolutely make sure it isn't the plug that is defective. Good luck
    Novicetryingtolearn's Avatar
    Novicetryingtolearn Posts: 2, Reputation: 1
    New Member
     
    #3

    Apr 23, 2007, 05:01 PM
    Thanks for the tip... well; the washer magically worked again. The only thing that I can possibly attribute this is that the water pressure was pretty low.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer (Model#110.82873120) Spin Probs [ 5 Answers ]

I have the Kenmore Elite King Size Washer, Model#110.82873120. Last night it quit working on the "Spin" cycle. I can still hear and feel the cycle operating, but there is a "clicking" that goes on and the agitator doesn't spin, nor does it agitate during the cycle. The draining mechanism...

Kenmore Elite Dryer Model 110.63932102 will not heat [ 6 Answers ]

My dryer stopped heating although it runs. I confirmed I was getting 240volts at the source. I checked the continuity of the element, the thermal fuse and the thermostat and found that they were continuous. I have read that the thermistor might have something to do with it...

Sears Kenmore Elite Gas Dryer mod.110.70092991 [ 6 Answers ]

My 3-yr.old Kenmore Elite Gas dryer has been doing very odd things! After running a load, when the dryer shuts off, or I shut it off (clear it), the touch control panel goes dead. No lights are lit. If you push the touch pad for various cycles it will not do anything. You can also push...

Washer Kenmore Elite Model 110.23022101 [ 2 Answers ]

Hello, My Kenmore Elite washer made a loud clicking noise when it got to the spin cycle. It appears that it will not spin or agitate. It will drain. Any thoughts before I call a repair man?

Kenmore Elite Model 110 [ 1 Answers ]

The washing machine is not spinning, so I am attempting to replace the coupler. I am able to partially remove the front console, but I can not remove the main knob. I found instructions that say to hold the dial and turn timer knob counter clockwise, but this is not working. This should be...


View more questions Search