Ask Experts Questions for FREE Help !
Ask
    aedurham's Avatar
    aedurham Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 1, 2011, 10:01 AM
    Moen: Water not diverting from bathtub spout to shower head.
    I just installed the Moen T2153 tub/shower fixtures. I'm having trouble with the bathtub spout. It is a slip tube application in which the spout 'slips' over 1/2" copper tubing coming out of the wall. When I pull up the lever on the spout to divert water to the shower head, water comes gushing out the back of the spout at the wall instead.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jan 1, 2011, 10:19 AM

    You need to remove the spout and inspect it. Sounds like the slip washer is not making a good seal. Also slide your fingers all around the copper pipe to see if you have any nicks or debris on the pipe. Did not water at all come out of the shower arm?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #3

    Jan 1, 2011, 10:58 AM

    Aedurham,

    Follow Ballenger1 advice you will be OK make sure you check the O ring for any damage if you see any replace the O ring and I would suggest to lnbricate the O ring before installation, Good luck and happy New Year.

    John

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The water in my shower will not switch from the shower head to the tub spout? [ 5 Answers ]

I recently purchased a small home, that I am getting ready to rent out the problem is I get water from the shower head just fine, but I get not water from the tub spout, any ideas?

Water flow from tub spout and shower head why? [ 5 Answers ]

I replaced the packing on the diverter.. however, when I turn the water on to a full flow hot or cold it comes out of the tub spout and the shower head. Also when I turn the diverter on to run the shower with hot and cold water the cold water takes over like the hot water isn't even on. It is a 3...

New Moen water comes out shower head and tub spout [ 6 Answers ]

I installed Moen 82244HH Series with one handle tub/Shower valve. The problem is water comes the shower head even the tub spout is removed (only the pipe from on the wall. Water temperature mixture is correct, the handle turns CCW to ON and CW to OFF. I don't think I installed the valve upside down...

How Do I Stop Water From Coming Out OF bathtub spout when I turn on shower. [ 7 Answers ]

Three handle bathtub 1953 price pfister I can not find a replacement for the diverter as threads first and them holes. I replad seats

Too much water coming from the spout and not enough from the shower head [ 2 Answers ]

Hi, I have a question about my shower. I have a shower/bath tub combo in my bathroom. Recently I noticed that when I try to pull the shower diverter on the spout to take a shower barely any water goes to my shower head and most of it comes out of the spout. I have no idea what to do to fix it. ...


View more questions Search