Furnace does not stop provinding heat for the house.

MSosa328 Posts: 1, Reputation: 1

New Member

Dec 25, 2010, 10:12 AM

Furnace does not stop provinding heat for the house.

I replaced a few parts to my furnace , including the limit switch MR215 carrier. After I
Changed this part , I noticed that the furnace continues working the 24 hours of the day.
When it is not providing heat, it supplies the house with fresh air. What do you think the problem is ?

Check out some similar questions!

Gas furnace.. it will stop putting out heat, but the blower stays on.. [ 3 Answers ]

If we go out and check the furnace it says it is normal(the blinking) if we take out the fuse for about 15-20min it works fine for a couple of days and then starts the same stuff all over... could this be a sensor or the thermostat?

Why will my heat pump not stop running and its cold in the house [ 7 Answers ]

Its 12 degrees outside of a night now and the heat pump ran all night and its only 65 degrees in the house with the thermostat set at 72. Only warming up to like 25 during the day outside. I switched to emergency heat last night and woke up to the house being 72 degrees but the emergency heat is...

New gas furnace- not enough airflow to heat house. [ 1 Answers ]

I replaced the original forced air oil furnace (circa 1985) with the new gas furnace about a year ago and it simply isn't moving enough air to heat my 2-story 2400 sq ft house. Additionally, a part (forgive me, I don't know exactly which one) keeps failing and the company keeps replacing it (they...

Furnace will not stay on to heat house [ 3 Answers ]

For some time now I have been having trouble with my furnace. When I turn up the thermostat to cut in the furnace, it comes on for about 5 minutes and then stops. The only way to get it to come on again is to turn the power off to the furnace and then on again. After doing this it cycles again...

View more questions Search

Check out some similar questions!

Add your answer here.