Ask Experts Questions for FREE Help !
Ask
    kaal85's Avatar
    kaal85 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 23, 2010, 03:51 PM
    White-rodgers gas valve installation instructions?
    I need to know how to wire a 36h64-463 gas valve.
    kaal85's Avatar
    kaal85 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 23, 2010, 03:55 PM
    How do I wire a mod. 36h64-463 gas valve? The old valve that I had was a 36c76-314 is outdated.
    Dennis1523's Avatar
    Dennis1523 Posts: 54, Reputation: 2
    Junior Member
    		  
    #3

    Dec 23, 2010, 07:05 PM
    Follow the schematic. It should have the diagram in the booklet that came with the valve. I recommend you call a pro. A gas valve is no toy and can cause injury or damage to the house. The way your wires were on the other valve are the way you wire the new one. The valve will have mv and other things on it and so will your schematic and which wire goes to what.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #4

    Dec 23, 2010, 08:09 PM
    It's a 2 stage gas vlave. You should have the markings on top for high, low and common just like the old one.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #5

    Dec 23, 2010, 08:10 PM
    Failure to read and follow all instructions carefully before installing or operating this control could cause personal injury and/or property damage!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers zone valve troubleshooting [ 2 Answers ]

My 12s16 102 zone valve is not closing with thermostat setting change. How can I get a manual or t-shooting tips?

Help with white rodgers 36c03 type 200 gas valve [ 0 Answers ]

My pilot in my furnace lights and starys lite for a number of days. Then the pilot goes out, usually in the middle of the night. I have changed the thermocouple but still getting the same results. The pilot looks OK. Blue flame about 1 inch long with a slight yellow in the tip. Any...

36C67-189 White Rodgers Gas Valve, white and blue wires: which is TH and which is TR? [ 2 Answers ]

Simple version... 36C67-189 White Rodgers Gas Valve, white and blue wires: which is TH and which is TR? Long version... I'm installing a new gas valve in my 1989 era coleman furnace (The correct modern replacement, the 36C67-189 White Rodgers Gas Valve). My furnace has a white and a blue wire. ...

White rodgers gas valves [ 1 Answers ]

I have a WR gas valve model 36C68 type 209. Gas is continuously provide to the pilot, even when the pilot is disconnected electronically, and or, when the entire furnace system is unplugged. I have removed and inspected the pilot control value mounted on top of the gas value body. The small...

White Rodgers gas valve 36e troubleshooting [ 3 Answers ]

I have a Lennox G23 furnace with a White-Rodgers 36E24-204 NG valve that continually is tripping the limit switch, due to a condition where the pilot is putting out way too much flame. I can see areas on the plate where the limit / rollout switch sits, and the flame has deposited large amounts of...

View more questions Search