I have a heil furnace NUGM075EGB1 not lighten all the time

d2hung Posts: 1, Reputation: 1

New Member

Dec 21, 2010, 07:10 PM

I have a heil furnace NUGM075EGB1 not lighten all the time

I have a heil furnace I have to remove the combustion cover on a 90% to make the pilot come on sometime no all the time. Reset then is OK for a bit.

Check out some similar questions!

Heil Furnace [ 0 Answers ]

My furnace is giving me the code of the red light flashing three times, the book says this means that the pressure switch is stuck closed or the manual switch is in the off position. I have checked the manual switch and it is in the on position so I'm figuring this means the pressure switch is...

I have a heil 9000 furnace I turn the furnace on and nothing happens [ 0 Answers ]

I hear a hissing noise coming from the inducer motor and the pilot does not come on what can the issue be

I have a Heil DC90 Ultra high Efficiency furnace that the fan runs all the time but I [ 1 Answers ]

The fan runs all the time but the unit never lights or heats. Where are the limit swithches that might need to be re-set?

Heil furnace [ 0 Answers ]

Diagnostic code lo pressue switch open when should be closed on two stage. Only on first heat cycle/lo. Does it need new lo pressure switch? Or simpiliarfix?

Heil Furnace-Combustion fan comes on but furnace does not come on [ 12 Answers ]

I have a 10 year old Heil furnace. When the furnace tries to come on the combustion fan comes on but nothing happens after that. The pilot does not come on, no flames, nothing. I hired a service tech and he said that we need to change the gas valve since it faulty. Is there anything else I...

View more questions Search

Check out some similar questions!

Add your answer here.