 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas log main gas flow
I have an LP gas log with a required safety valve which has the integral pilot light. All worked OK last year. Now, when I light the pilot, it looks OK, but when I turn up the gas flow to get the flame over the logs, it is minimal in size, and the pilot gets larger. The LP tank is full. Is something stuck or what should I do first?
|
||||
Check out some similar questions!
We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:
I have read several posts with regard to my gas log (NG)pilot won't lite. I have determined that there is gas to the gas valve by opening the connection and turning on the main gas valve at the fireplace. I have held the pilot light button in for extended periods, but it just won't lite. I also...
Goodman Furnace Direct Ignition - Blower kicks on - pressure switch works - HSI heats up for about 8 secs -- NO GAS - HSI goes out Status light just blinks slowly, continuously until I let go of the panel switch. Gas valve is ON - ball cock is open - plenty of gas pressure (hot water...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
