 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a luxaire high efficiency furnace made in 1994 that is getting the error code for the pressure switch being stuck open. I took the rubber hose off to make sure it didn't have any holes or was clogged and then used a paperclip to clean out the connection by the fan, but it is still flashing 3...
My furnace will not kick on to heat. I have 3 blinking red lights saying the pressure switch is stuck on open. How do I fix this?
I have a york gas furnace. Condensation is leaking out of the exhaust motor. I removed the motor and everything seemed to be fine but when I put it back in and try to start the furnace, the red light flashes 3 times indicating pressure switch stuck open. What do I do now? I'm lost.
I have a Tempstar furnace that's reading a/an open pressure switch code. How do I correct this issue?
I have a gibson forced hot air furnace and a have a code that is telling me that the pressure switch is open. If I drain the water out of it it will run for a short period.. Do you think I need a new pressure switch or do I have a drainage line clogged. Model number KG6R060C-12a
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
