 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York furnace pressure switch stuck open
I have a york gas furnace. Condensation is leaking out of the exhaust motor. I removed the motor and everything seemed to be fine but when I put it back in and try to start the furnace, the red light flashes 3 times indicating pressure switch stuck open. What do I do now? I'm lost.
|
||||
Check out some similar questions!
I get three red flashes from the furnace after an attempt sequence when the t-stat calls for heat. The motor starts, and seems to try to light but after about thirty seconds, it quits and gives the error code. I have removed both gray tubes from the pressure switch and made sure they are...
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals
I have a Tempstar furnace that's reading a/an open pressure switch code. How do I correct this issue?
I have a gibson forced hot air furnace and a have a code that is telling me that the pressure switch is open. If I drain the water out of it it will run for a short period.. Do you think I need a new pressure switch or do I have a drainage line clogged. Model number KG6R060C-12a
I have a York heater that won't heat our second floor. The indicator LED light flashes three times which means the Pressure Switch is Stuck Open. Is there a way I can fix this myself? If so, how? Thanks in advance for any help. John
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
