Ask Experts Questions for FREE Help !
Ask
    gman71's Avatar
    gman71 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2010, 05:57 PM
    Program remote for ceiling fan.
    We purchased 2 used hunter ceiling fans and then bought 2 remotes from Lowe's (part#85095-01)and need to program them to work. Any ideas? Thanks
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 19, 2010, 08:37 PM
    Do you have both the transmitter and receiver? Was this fan set up for remote to begin with? What do the instructions say?
    gman71's Avatar
    gman71 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 19, 2010, 08:46 PM
    Yes the receiver is built in and the fans were set up with remotes before. We don't have any instructions.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Dec 19, 2010, 08:54 PM
    Assuming the frequency of the units are the same, make sure the DIP switches on both parts are set the same. Then, wire the fan and give it a try. You will only need 1 power feed for a remote controlled fan. If you have 2 switches, wire nut off one power lead in the box.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lost the remote to our ceiling fan - any way to operate fan without remote? [ 6 Answers ]

We have lost the remote to a generic brand ceiling fan. The light still works, but cannot get the fan to work without the remote - any way to override the remote feature and operate the fan - air conditioning is out in house and we are miserable!!

How to change ceiling fan remote batteries on a hamilton bay remote control unit [ 3 Answers ]

Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?

Harbor Breeze ceiling fan wall remote and LCD remote [ 1 Answers ]

Hello, I've just installed 2 harbor breeze fans that came with LCD remote. Everything works as they suppose to. 2 remotes controlling each fan with dip SW set up. Then, I thought it would be nice if I purchase the wall remote unit so that I do not have to search for remote all the time....

How do I program hampton bay ceiling fan remote [ 1 Answers ]

How do I program my hampton bay ceiling fan remote control? Thanks, Ronnie

How do I program my Harbor Breeze Ceiling Fan Remote [ 2 Answers ]

My Harbor Breeze Ceiling Fan remote has been working just fine until last night. It would not turn the light off. I turned off the main power switch and turned it back on then the remote worked. However, today it is again not working. I can not turn the light back on, nor can I change the speed...

View more questions Search