 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite Ultra Wash HE (hidden buttons) Blinking green light
I have tried:
1. Pressing Heated Dry, Hi Temp, Heated Dry, Hi Temp, close door, Start, open door, Cancel 2x's 2. Normal Wash, Heated Dry, Normal Wash, Heated Dry, Normal Wash, Heated Dry, Cancel The green light did start flashing, but returned a few moments later when I tried to start a new wash cycle of any kind. Any suggestions? Thanks! |
||||
Check out some similar questions!
I have tried to press cancel and that cases lock on light with cancel and normal wash light to blink. If I open door and reshut, then the normal light continues to blink and my dishwasher does not work at all. Can you help? Is there a way to reset, my repair man turned off power for a few minutes...
Just a quick question.
I took the door panel out. When the latch cables came in contact with the top tray the unit started working. Now, It's back to the cancel/drain light blinking and the other controls don't work. Tried different reset sequences and they don't work. Sears want's $129 just to come and take a look....
I have a 3 year old Kenmore dishwasher. Recently my hot water heater went out and I did not know it. I had started the dishwasher, and since the dishwasher did not sense hot water, it began blinking. The cleaning light blinks green 7 times and then repeats. I found out later about the problem...
I have a Kenmore Ultra Wash dishwasher that is approximately 7 years old. About 3 days ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock but it did nothing. I can push the cancel/drain button and that only causes them both to blink. I have tried cutting the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
