 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a Kenmore Ultra Wash 665.1671900. The Cancel/Drain light keeps blinking.
I took the door panel out. When the latch cables came in contact with the top tray the unit started working. Now, It's back to the cancel/drain light blinking and the other controls don't work. Tried different reset sequences and they don't work. Sears want's $129 just to come and take a look. Please help.
|
||||
Check out some similar questions!
Model #: 665.17363301 This morning the 'normal wash' light started blinking and the dishwasher will not respond. I've turned the power off and on and it returns to the blinking light. The only other button that does anything (though not consistently) is the 'cancel/drain' button that when pushed...
Kenmore ultra wash 665.15779990 lock light on
I have a Kenmore Ultra Wash Dishwasher Model 665.159 that will flash the Pots & Pans plus the Quick Rinse LED's. Sometimes the dishwasher will start a cycle but stop and shows a "2" on the Delay Start display and then it seems to try to re-start to cycle the washer and continues that way until you...
Got a kenmore ultra 665 when you hit the normal wash it will go right to cancel light and start a drain cycle any ideas
I have a Kenmore Ultra Wash dishwasher that is approximately 7 years old. About 3 days ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock but it did nothing. I can push the cancel/drain button and that only causes them both to blink. I have tried cutting the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
