Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Clog in water supply lines after replacing section at main municipal supply...
[ 1 Answers ]
I had an exposed water supply line that ran from the city inlet to my house. It was old and rusty so we decided to replace it with a PEX pvc piping. It's the same dia. (3/4") and we replace the one 90 elbow with a 45 instead. When we turned the water back on, it had no pressure, and after my...
Supply line won't stop running. Main water supply off
[ 3 Answers ]
I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...
Replace Galvanized Water Mains with PVC?
[ 13 Answers ]
Water at our 40 year old condo townhouse development is rust stained and we are spending about $10,000 a year on our end of useful life galvanized pipes for large leak repairs. Is PVC the best replacement product? If so are their any specifications we should look for? If not, what is recommended?
Banging cold mains water pipe in bathroom.
[ 7 Answers ]
I'm just wondering if you could give me some advice as to what to do... When I turn on the cold water tap (mains pressure water) in the bathroom upstairs, water comes out normally until I turn it a bit more until water should be coming out fast, it then slows down then I hear banging and the...
No water from mains.
[ 3 Answers ]
Hi there, I searched this beautiful forum which I found really interesting :) but unfortunately could not find my answer, I am not much expert in plumbing but my father is an expert still somehow I do not agree with him that's why I came across these forums to get a solution, I recently moved from... View more questions Search
|