 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Had to remove our gas fireplace for some renovations and now I have reinstalled the fireplace the flame come on but not the fan. I notice the little red connector had come off and he put it back on without the red connector but the fan is not working... any suggestions would greatly be appreciated....
I have a rheem hvac with a fan that will not turn off unless I unplug the 110 from the outlet. I have varified that the problem is not in the thermostat.
We have a Forced air gas furnace with a programmable thermostat. What is happening is that the furnace will turn on when the temp drops, like it is supposed to, and the fan will come on to blow the hot air, but the fan doesn't turn off. It will continue to blow even when the air is cold coming out...
I have Gas heat/AC unit. I just installed HoneyWell RTH6300B thermostat. I have four wires from my old thermostat(G, W, Y, R). On new honeywell it has fith connection Rc. I connected all wires as instructed and jumpered R to Rc. Both gas heat and AC working however Fan only coming on for AC not for...
Hello, I have a Carrier weathermaker 8000 58WAV090 series furnace. When I turn the heater on, it seems like inducer motor is producing a continuous light sound. I ran a self-test and it also showed the same results while running the inducer test. Not sure what the problem is, rest of the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
